Make your own free website on Tripod.com








Scooby School
Cooling













Home | Exhaust | Tuning | Suspension | Transmission | Exterior | Interior | Brakes | Wheels | Contact Us





Zerosports Replica Splitter + Shroud - 02~03 WRX

rp_zs_splits.jpg

Replica Hood Splitter
The replica hood splitter is designed to reduce turbulence normally associated with the Impreza scoop & TMIC setup.  This splitter is priced much lower than the OEM one found on the STI-RA.  The fins allow equal dispersion of incoming air, and reduce TMIC temperatures. 

2 years limited warranty. 

 
Hood scoop & Spliter 100.00 including free postage and packaging!

RP-ZS-SPLIT-S

Hood Scoop 80.00 including free postage and packaging!

RP-ZS-SPLIT

Shroud only 30.00 including postage and packaging!

RP-ZS-SHROUD

Cusco Radiator Shroud - 02+ WRX

cus_shroud.jpg

Cusco Radiator Shroud
Increases air going through the radiator. Decreases incoming air temperature. Better combustion efficiency increases air going through the radiator for more output, thus holding down coolant temperature on track runs and continuous high speed drives, preventing over-heating.

MATERIAL: Light weight aluminum.

MOUNT: Bolt-on. Easily mounted by using nuts and bolts on the bodyside.
 
89.00 Including free postage and packaging!

CUS-667-003AL

GReddy V-SPL FMIC - 02+ WRX

grd_ic.jpg


Greddy V-SPL Frount Mount Intercooler
Dimensions: 240mm x 600mm x 76mm

Design: Bar & Plate

The Greddy V-SPL FMIC is a good solution for high power applications where the stock TMIC is simply not enough and where top mount heat-soaking is an issue.  The Greddy FMIC routes piping over the engine bay.  Foglight removal is required for 02-03 models.  Cutting of the bumper beam is required, we recommend professional installation.  Please ask us for information regarding JDM bumper beams, which will faciliate installation.

 
R.R.P 875.00
 
Scooby School price 849.00
 
20 postage and packaging

GRD-12060020

Blitz Type LM FMIC - 02+ WRX

bz_ic.jpg

Blitz LM Series Frount Mount Intercooler
Dimensions: 266mm x 610mm x 68mm

Design: Bar & Plate

The Blitz FMIC is a good solution for high power applications where the stock TMIC is simply not enough and where top mount heat-soaking is an issue.  The Blitz FMIC routes piping under the engine bay.  Foglight removal is required for 02-03 models.  Cutting of the bumper beam is required, we recommend professional installation.  Please ask us for information regarding JDM bumper beams, which will faciliate installation.

 
R.R.P 1150.00
Scooby School 1050.00
 
20 postage and packaging
 

BZ-12345































At Scooby School we will teach your Subaru a real lesson in performance tuning!